Call today for more info...(800) 494-9073
Company Info Mailboxes Customer Service
   

  

 






 Color Chart

Grey Stone
grey stone		 Cinnamon Spice
Cinnamon Spice		 Dark Chocolate Espresso
Dark Chocolate Espresso
Textured Sand
Textured Sand		 Spruce Patina
Spruce Patina		 Retro Gold
Retro Gold
Anodized Aluminum
Anodized Powder Coat		 Clear Anodized
Clear Anodized
{Check for Availability}		  

 

USPS Approved Product		 Anodized 4C Horizontal Series
Anodized Powder Coat
 Product Details Product Diagrams Installation Download Brochure
 
4C Horizontal Series


 Product Details

Combination units with USPS-required parcel boxes minimize horizontal space and maximize freight savings. USPS STD-4C compliant mailbox systems are mandatory on all new construction and major renovations as of October ‘06.

More Security

  • Exclusive “L” extrusion on every door resists prying -- 1/4” on control and parcel door; 3/16” on tenant doors.

  • Concealed Hinges -- no pry-points.
  • Riveted shelves prevent entry from an adjacent compartment.
  • Master door 5-point stainless steel lock with triple bolt catch prevents break-ins.

More Easily Installed

  • 3/4” trim eliminates the need for fillers between modules.

More Weather-Resistance

  • Exclusive SMC Rain Guard System allows installation in all weather conditions.
 
4C Horizontal Mailbox Spec Drawings
 
Installation Instructions for Horizontal 4C SMC1-08
  1. UNIT IS FRONT HEAVY, USE CAUTION WHEN LIFTING AND INSTALLING.
  2. BOX TO BE LAID FLAT. WHEN ITEM IS UPRIGHT, BOX MAY TIP OVER AND CAUSE INJURY.
  3. WALL MOUNT OPENING SHOULD BE SQUARE AND OF HIGH QUALITY TO ENSURE UNIT FUNCTIONS PROPERLY AND IS SECURE.
  4. UNIT MUST BE FULLY FRAMED WITH 2x4’s.
  5. 2x4 FRAME MUST BE FASTENED TO FLOOR.
  6. ½’’ THICK MAXIMUM DRYWALL OR SHEETROCK.
  7. CENTER OF THE UPPER MOST PATRON LOCK MUST BE NO MORE THAN 67’’ FROM FLOOR.
  8. TOP SURFACE OF BOTTOM SHELF MUST BE NO LESS THAN 15’’ FROM FLOOR.
  9. WITH THE MASTER DOOR OPEN AND THE HOLD-OPEN DEVICE ENGAGED, MOUNT THE UNIT TO THE PREPARED FRAME USING THE #10 x 1-1/4” SHEET METAL SCREWS PROVIDED. THE MOUNTING HOLES ARE LOCATED ON ALL FOUR SIDES OF THE UNIT JUST BEHIND THE PERIMETER TRIM.
 TOOLS NEEDED:
  • 1/8” Drill Bit
  • Phillips Screwdriver
        
   
     
 
CanadaMailboxes.com c/o Canadian Locker Co., Ltd
931 Progress Ave., Unit #5, Scarborough, Ontario, Canada M1G3V5
Tel: (800) 494-9073 or (416) 439-5992 | Fax: (416) 439-7036 | Send an e-mail
www.canadianlocker.com | www.canadamailboxes.com		 © copyright 2006
 
   
 

Home | Site Map | Catalog Request | Links